FAQ's | WHAT TO EXPECT

WHAT IS THE ASBESTOS TESTING PROCESS?

A licensed and certified inspector will inspect areas of concern and identify suspect building materials that might contain ASBESTOS.

We will visually inspect areas of concern or areas, take photos of these areas, create a sketch, and also pin point on our sketch where the samples were collected from.

IS IT SAFE TO BE IN THE HOME OR ROOM DURING THE INSPECTION?

Yes, during our inspection it is safe to be in the home or room. Samples will be collected in a manner to minimize disturbance and damage to the areas being tested.

HOW ARE THE SAMPLES ANALYZED?

After inspection, samples collected will be taken to a third party laboratory and analyzed. Results are usually received within 24 hours.

WHEN I AM RECEIVING THE RESULTS?

Once results are received we will update our point of contact with verbal results which will be the Homeowner or the Contractor.

WHEN WILL THE REPORT BE READY?

Once the invoice is paid a full report will be emailed approximately within 24 Hours.

WHAT IS THE LEAD TESTING PROCESS?

A licensed and certified inspector will inspect areas of concern and identify suspect building materials that might contain LEAD.

We will visually inspect areas of concern or areas, take photos of these areas, create a sketch, and also pin point on our sketch where the samples were collected from.

IS IT SAFE TO BE IN THE HOME OR ROOM DURING THE INSPECTION?

Yes, during our inspection it is safe to be in the home or room. Samples will be collected in a manner to minimize disturbance and damage to the areas being tested.

HOW ARE THE SAMPLES ANALYZED?

After inspection, samples collected will be taken to a third party laboratory and analyzed. Results are usually received within 24-48 hours.

WHEN I AM RECEIVING THE RESULTS?

Once results are received we will update our point of contact with verbal results which will be the Homeowner or the Contractor.

WHEN WILL THE REPORT BE READY?

Once the invoice is paid a full report will be emailed approximately within 24 Hours.

WHAT IS THE MOLD TESTING PROCESS?

A certified inspector will inspect areas of concern and identify suspect building materials that might contain MOLD.

We will visually inspect areas of concern or areas, take photos of these areas, create a sketch, and also pin point on our sketch where the samples were collected from.

IS IT SAFE TO BE IN THE HOME OR ROOM DURING THE INSPECTION?

We will visually inspect areas of concern, take photos of these areas, and check for moisture or any suspect mold. Adequate samples will be collected based on the inspectors recommendation and the clients concern (air, swab, tapelift).

HOW ARE THE SAMPLES ANALYZED?

After inspection, samples collected will be taken to a third party laboratory and analyzed. Results are usually received within 24-48 hours.

WHEN I AM RECEIVING THE RESULTS?

Once results are received we will update our point of contact with verbal results which will be the Homeowner or the Contractor.

WHEN WILL THE REPORT BE READY?

Once the invoice is paid a full report will be emailed approximately within 24 Hours.

What To Expect (FAQ's)

WHAT IS THE ASBESTOS TESTING PROCESS?

A licensed and certified inspector will inspect areas of concern and identify suspect building materials that might contain ASBESTOS.

We will visually inspect areas of concern or areas, take photos of these areas, create a sketch, and also pin point on our sketch where the samples were collected from.

IS IT SAFE TO BE IN THE HOME OR ROOM DURING THE INSPECTION?

Yes, during our inspection it is safe to be in the home or room. Samples will be collected in a manner to minimize disturbance and damage to the areas being tested.

HOW ARE THE SAMPLES ANALYZED?

After inspection, samples collected will be taken to a third party laboratory and analyzed. Results are usually received within 24 hours.

WHEN I AM RECEIVING THE RESULTS?

Once results are received we will update our point of contact with verbal results which will be the Homeowner or the Contractor.

WHEN WILL THE REPORT BE READY?

Once the invoice is paid a full report will be emailed approximately within 24 Hours.

WHAT IS THE LEAD TESTING PROCESS?

A licensed and certified inspector will inspect areas of concern and identify suspect building materials that might contain LEAD.

We will visually inspect areas of concern or areas, take photos of these areas, create a sketch, and also pin point on our sketch where the samples were collected from.

IS IT SAFE TO BE IN THE HOME OR ROOM DURING THE INSPECTION?

Yes, during our inspection it is safe to be in the home or room. Samples will be collected in a manner to minimize disturbance and damage to the areas being tested.

HOW ARE THE SAMPLES ANALYZED?

After inspection, samples collected will be taken to a third party laboratory and analyzed. Results are usually received within 24-48 hours.

WHEN I AM RECEIVING THE RESULTS?

Once results are received we will update our point of contact with verbal results which will be the Homeowner or the Contractor.

WHEN WILL THE REPORT BE READY?

Once the invoice is paid a full report will be emailed approximately within 24 Hours.

WHAT IS THE MOLD TESTING PROCESS?

A certified inspector will inspect areas of concern and identify suspect building materials that might contain MOLD.

We will visually inspect areas of concern or areas, take photos of these areas, create a sketch, and also pin point on our sketch where the samples were collected from.